Design
Disposable oil mist adsorber, without valves
integrated filter element 3 µm
Installation position
vertical
Temp. min.
-40 °C
Please choose a variant
Characteristics
Design
- Disposable oil mist adsorber, without valves
- integrated filter element 3 µm
Installation position
- vertical
Temp. min.
- -40 °C
Temp. max.
- 80 °C
Material
- Housing: PA6, PC, PVC
- seal: FKM (FPM)
Connection
- BSPP male thread, parallel
Connection position
- at bottom
Customs tariff number
- 84213925
All characteristics
Product description
Notes
Design basis are medium, tank volume and evaporated oil volume.
Description
They are suitable for indoor and outdoor use on hydraulic units, gearboxes, barrels and IBCs.
The plastic housing is filled with activated carbon.
In combination with a splash guard and oil demister, the activated carbon cleans the air flowing out of the system and thus protects the environment from contamination by oil aerosols.
If the adsorber is saturated (discoloration of the white silica gel layer), it is replaced.
Further information
Larger oil aerosols stick to the metal demister, condense and drip back into the tank. The smaller oil aerosols are bound in the pores of the activated carbon.
The saturation (loading) and the necessary replacement of the filter cartridge is indicated by a colour change of the white layer from colourless to brown.
The adsorber is completely replaced after saturation.
Activated carbon mainly consists of carbon with a highly porous structure. The pores are interconnected like a sponge. Activated carbon mainly consists of carbon with a highly porous structure. The pores are interconnected like a sponge.
The inner surface is between 300 and 2000 m²/g coal, so the inner surface of four grams of activated carbon corresponds approximately to the area of a soccer field. The density of activated carbon is in the range of 0.2 to 0.6 g/cm³.
Activated carbon binds non-polar substances (substances that cannot be mixed with water) in the internal pores.
Ordering information
Product variants
3 Results
Search
Show dimensional drawing
Identifier
Details / items
Air volume: recommended air flow for optimal cut-off efficiency
Column selection
Air volume (m³/h)
For tank size
Oil absorption capacity max. (l)
Activated carbon fill quantity (kg)
A (mm)
B (mm)
C (mm)
G
Air volume: recommended air flow for optimal cut-off efficiency