Что вы ищете?

Ввести поисковый термин

Нам очень жаль!

Результаты поиска отсутствуют.

Вход в систему

Вы новый клиент?

Зарегистрируйтесь и получите множество преимуществ:

Проверка наличия продуктов
Быстрый повторный заказ и история заказов
Персональные рекомендации по продуктам
Оплата по счету

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
ЧАВО

HK 92RV 04 BG2

Gear flow divider, group 2 92RV 4-way
Design
with one phase compensation valve and anti-cavitation valve per section 
external leak oil discharge 
adjustment range DBV: 70 - 210 bar 
Pressure difference
max. 30 bar (between the sections) 
Construction type
4 sections 
Скачать файл PDF

Свойства

Design
  • with one phase compensation valve and anti-cavitation valve per section 
  • external leak oil discharge 
  • adjustment range DBV: 70 - 210 bar 
Pressure difference
  • max. 30 bar (between the sections) 
Construction type
  • 4 sections 
Size
  • group 2 
Customs tariff number
  • 84122981 
Все свойства

Описание изделия

Указания
Before commissioning the system, the first running-in of the gear flow divider should be under no load.
Diagrams and circuit diagrams essentially valid as schematic diagrams also for 4-way flow dividers.
Описание
This flow divider is used to supply four independent hydraulic circuits with just one pump.
Division error approx. 3 %.
Different pressure settings for each section possible.
Valves adjustable from 70 - 210 bar, other setting ranges on request.
Modification to internal leak oil discharge possible - for this, close off port T with G1/2″ blind plug (modification recommended only after consultation!).
After conversion to internal leak oil discharge, the function of the suction valves is disabled.
Configuration of gear flow dividers: qi = Q/z * 1000/n.
Qi = displacement/section [cm³].
Q = total input volume flow [l/min].
Z = number of sections.
N = rotating speed [rpm].
Дополнительная информация
Recommended speed: 1800 - 2000 rpm

Product variants

5 Results
Показать чертеж с размерами
Наименование
p1макс. (bar)
p2макс. (bar)
Расход на элемент min. (l/min)
Расход на элемент nom. (l/min)
210 bar
260 bar
4,8 l/min
7,6 l/min
Узнать больше
210 bar
260 bar
7,2 l/min
10,8 l/min
Узнать больше
210 bar
260 bar
10,8 l/min
15,1 l/min
Узнать больше
210 bar
260 bar
13,2 l/min
19,4 l/min
Узнать больше
200 bar
230 bar
16,8 l/min
25,9 l/min
Узнать больше
p1 = max. working pressure
p2 = max. peak pressure

Column selection

p1макс. (bar)
p2макс. (bar)
Расход на элемент min. (l/min)
Расход на элемент nom. (l/min)
Расход на элемент макс. (l/min)
Входной объем на секцию (cm³)
A (mm)
Li (mm)
p1 = max. working pressure
p2 = max. peak pressure