HK SP 115V 42C

Solenoid coil 115VAC for HK 42C

The product image may differ

Nominal voltage +/- 10 %

115 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average current consumption

0.99 A

Download PDF

Please choose a variant

Show table of articles

HK SP 12V 42C HK SP 24V 42C HK SP 205V 42C HK SP 115V 42C HK SP 230V 42C

Product details for

HK SP 115V 42C

Nominal voltage +/- 10 %

115 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average current consumption

0.99 A

Characteristics

Customs tariff number

85059029

Product description

Notes

In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase.
These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through.
A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.

Ordering information

Other types of coil available on request