PR 04-1 V1

Hydraulic tube 4x1 1.4301

The product image may differ

Ø d1

4 mm

1 mm

Specific load I

558 bar

Скачать файл PDF

Выберите исполнение

Показать таблицу товаров

PR 04-1 V1 PR 05-1 V1 PR 06-1 V1 PR 06-1.5 V1 PR 08-1 V1 PR 08-1.5 V1 PR 10-1 V1 PR 10-1.5 V1 PR 12-1 V1 PR 12-1.5 V1 PR 12-2.5 V1 PR 12-2 V1 PR 12-3 V1 PR 14-2 V1 PR 14-2.5 V1 PR 14-3 V1 PR 15-1.5 V1 PR 16-1 V1 PR 16-2 V1 PR 18-1 V1 PR 18-1.5 V1 PR 18-2 V1 PR 20-2 V1 PR 22-1 V1 PR 22-1.5 V1 PR 22-2 V1 PR 24-2 V1 PR 25-5 V1 PR 28-1 V1 PR 28-2 V1 PR 28-3 V1 PR 28-4 V1 PR 30-2 V1 PR 30-3 V1 PR 30-4 V1 PR 30-5 V1 PR 38-4 V1 PR 40-4 V1 PR 40-5 V1 PR 42-2 V1 PR 42-3 V1 PR 50-1.5 V1 PR 50-2 V1 PR 57-2 V1 PR 64-2 V1 PR 70-2 V1

Подробное описание продукта

PR 04-1 V1

Ø d1

4 mm

1 mm

Specific load I

558 bar

Specific load III

376 bar

Ø d2

2 mm

AD tolerance +/-

0.08 mm

ID tolerance +/-

0.15 mm

Все свойства

Свойства

Construction type

precision steel tube, seamless, (cold-drawn), metric

Design

metric

Material

stainless steel X5CrNi18-10 (1.4301 / AISI 304)

Material condition

CFA = bright annealed (annealed, metallically bright)

Standard

DIN EN 10216-5

Tube length

5 to 7 metres*.

Customs tariff number

73044100

Все свойства

Описание изделия

Указания

The pressure figures are based on straight tubes.
The appropriate wall thickness needs to be calculated for tubes with bends as stipulated in DIN EN 13480-4.
*Stainless steel tubes are supplied in manufactured lengths according to EN 10216-5. In terms of production, these are usually 6 meters (+/- 1m). Order quantities are rounded to the nearest possible total length, without cutting.

Описание

The stainless steel pipes made of materials 1.4301 / AISI 304 (V1), 1.4541 / AISI 321 (V2) and 1.4571 / AISI 316Ti (V4) are supplied in CFA condition (bright annealed) as standard. This condition offers very good bendability and is the established standard in the hydraulics sector, particularly for the installation of pipelines.
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.

Дополнительная информация

Calculation analog DIN 2413
Specific load I: static (up to 120 °C)
Specific load III: dynamic (up to 120°C)
Working stroke= P bar
Strength parameter: K 218 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 175 [N/mm²]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
Elastic strength to DIN DIN 10216-5 Rp 1.0 to 50°C
The fatigue strength value was reduced in relation to the strength parameter by 1.4571.

Указание по заказу

Other delivery conditions, such as CFD, are available on request and must be specified separately.